dmi_ipmi_device_details

Synopsis

#include <opendmi/entity/ipmi-device.h>

typedef union dmi_ipmi_device_details {
    uint8_t __value;

    struct {
        uint8_t is_intr_level_triggered : 1;
        uint8_t is_intr_active_high     : 1;
        uint8_t __reserved_1            : 1;
        uint8_t is_intr_info_specified  : 1;
        uint8_t base_address_lsb           : 1;
        uint8_t __reserved_2            : 1;
        uint8_t register_spacing        : 2;
    };
} dmi_ipmi_device_details_t;

Description

The dmi_ipmi_device_details_t union describes the byte of the IPMI device information structure which follows the base address: the base address modifier and the interrupt information. The byte can be read as a whole through __value, or bit by bit through the named members.

The decoder does not keep the byte: it spreads it over the fields of dmi_ipmi_device_t, and the union serves to read or build the raw byte. For the SSIF interface, the byte is unused and set to 0.

Fields

__value

Raw value of the byte.

is_intr_level_triggered

Set if the interrupt is level-triggered, clear if it is edge-triggered. Meaningful only when is_intr_info_specified is set.

is_intr_active_high

Set if the interrupt is active high, clear if it is active low. Meaningful only when is_intr_info_specified is set.

__reserved_1

Reserved bit, set to 0.

is_intr_info_specified

Set if the byte specifies the trigger mode and the polarity of the interrupt.

base_address_lsb

Least-significant bit of the base address of the BMC.

__reserved_2

Reserved bit, set to 0.

register_spacing

Distance between the interface registers, as a code of dmi_ipmi_register_spacing.

See also

dmi_ipmi_device, dmi_ipmi_register_spacing

Standards

DMTF SMBIOS Specification (DSP0134), version 2.3 or newer.